- Overview
- Product Description
- Features
- PRODUCTS DETAILS
- DRAWING
- Test and inspection
- Application and Case
Basic Info.
Product Description
Code:90R
Size: 1/2''*3/8''-3''*2''
Material: BS EN 1562,EN-GJMB-350-10,KTH350-10
Dimension: BS EN 10242
Thread: ISO 7-1,BS 21,BSPT
Pressure Rating: PN16/PN25
Surface Treatment:Hot-dip Galvanized,Electro Galvanized,Black
Certificate: UL Listed / FM Approved / NSF 61
Application: Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems
Malleable Iron 90R Reducing Elbow 90°.The reducing 90°elbow is one kind of malleable iron pipe fittings, which can connect two pipe joints of the different nominal diameter to make the pipe can be turned 90 degree. Malleable Iron 90R Reducing Elbow is a kind of casting elbow, through melting, annealing, and then machined into pipe fittings. This material pipe fittings have good malleable castability, are relatively easy to process, and have a certain strength. Fittings are used in piping systems with working pressures between 1.6MPa to 2.5MPa.
| Size | A(mm) | B(mm) | PCS/CTN. | Size | A(mm) | B(mm) | PCS/CTN. | Size | A(mm) | B(mm) | PCS/CTN. |
| 1/2''*3/8" | 25 | 25 | 270 | 2"*1/2" | 37 | 47 | 68 | 3"*1" | 49.5 | 67 | 20 |
| 3/4"*1/2" | 29 | 30 | 270 | 2"*3/4" | 40 | 49 | 52 | 3"*1-1/4" | 54.5 | 69 | 20 |
| 1"*3/8" | 29 | 31 | 160 | 2"*1" | 43 | 51 | 50 | 3"*1-1/2" | 57.5 | 71 | 20 |
| 1"*1/2" | 31 | 33 | 160 | 2"*1-1/4" | 47 | 53 | 40 | 3"*2" | 61.5 | 71 | 12 |
| 1"*3/4" | 34 | 35 | 160 | 2"*1-1/2" | 51 | 54 | 30 | 3"*2-1/2" | 47.5 | 59 | 12 |
| 1-1/4"*3/8" | 31 | 36 | 100 | 2-1/2"*1/2" | 40.5 | 56 | 46 | 4"*1/2" | 51.5 | 61 | 14 |
| 1-1/4"*1/2" | 34 | 37 | 100 | 2-1/2"*3/4" | 43.5 | 57 | 40 | 4"*3/4" | 54.5 | 61 | 14 |
| 1-1/4"*3/4" | 36 | 40 | 100 | 2-1/2"*1" | 47.5 | 59 | 34 | 4"*1" | 59.5 | 64 | 14 |
| 1-1/4"*1" | 40 | 41 | 90 | 2-1/2"*1-1/4" | 51.5 | 61 | 30 | 4"*1-1/4" | 42.5 | 64 | 14 |
| 1-1/2''*1/2" | 35 | 41 | 90 | 2-1/2"*1-1/2" | 54.5 | 61 | 26 | 4"*1-1/2" | 45.5 | 65 | 10 |
| 1-1/2''*3/4" | 37 | 43 | 90 | 2-1/2"*2" | 59.5 | 64 | 24 | 4"*2" | 49.5 | 67 | 10 |
| 1-1/2''*1" | 41 | 45 | 70 | 3"*1/2" | 42.5 | 64 | 36 | 4"*2-1/2" | 54.5 | 69 | 8 |
| 1-1/2''*1-1/4" | 45 | 47 | 56 | 3"*3/4" | 45.5 | 65 | 30 | 4"*3" | 57.5 | 71 | 8 |
All Fluid Tech pipe fittings are inspected strictly with the specifications of standard of EN10242. Some points are higher than EN10242 to ensure our wonderful quality.
Air tightness test: higher 20% than EN10242, according EN10242 pipe fittings are test by one of the following methods
a)An internal hydrostatic pressure of not less than 20 bar.
b)An internal pneumatic pressure of not less than 5 bar.
Fluid Tech adapt 6 bar pneumatic pressure, higher 20% than EN10242, to ensure each fittings with fantastic performance while using.
Fluid Tech pipe fittings are mainly used in water systems, petrochemical systems, gas systems, plumbing systems, fire fighting system and so on.
Our advantage -2
Heaviest quality
Compared with BS EN 1562 standard products, the quality of our malleable iron pipe fittings is the highest. Once you try it, it is obviously thicker and heavier than the EN standard pipe fittings of the same specifications from any other domestic manufacturers. No matter the cost, customers can trust Fluid Tech.
